DTC P1285 - Cylinder Head Over Temperature Condition
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P1285 - CYLINDER HEAD OVER TEMPERATURE CONDITION
| Description: | This DTC sets when an engine overheat condition was sensed by the cylinder head temperature (CHT) sensor. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | On some applications when this fault occurs the engine temperature warning indicator illuminates or forces the temperature gauge to the full H (hot) zone. The warning indicator can be triggered by either grounding the engine temperature warning circuit when wired to the PCM, or by sending a PCM network message to the instrument panel cluster (IPC). | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DL . | ||