LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 75 (Engine Controls - Powertrain DTC Descriptions (Except Diesel & Hybrid) - DTC P0610 - P2149) >> DTC P1001 - KOER Not Able To Complete, KOER Aborted

DTC P1001 - KOER Not Able To Complete, KOER Aborted

WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P1001 - KOER NOT ABLE TO COMPLETE, KOER ABORTED

Description:  This non-malfunction indicator lamp (MIL) DTC sets when the KOER self-test does not complete in the time allowed.
Possible Causes: 
  • Incorrect self-test procedure
  • Unexpected response from the self-test monitors
  • RPM out of specification
Diagnostic Aids:  Carry out the KOEO self-test. GO to PINPOINT TEST QT .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.