DTC P08B7 - Clutch Pedal Position Sensor B Circuit High
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P08B7 - CLUTCH PEDAL POSITION SENSOR B CIRCUIT HIGH
| Description: | This DTC sets when the CPP2 signal is out of self-test range high. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | A CPP sensor PID reading may indicate a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TA . | ||