LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Climate Control System - General Information (2 Of 2) (Except Hybrid)) >> Removal And Installation >> Condenser Outlet Line - 2.7L EcoBoost (238kW/324PS) >> Installation

Condenser Outlet Line - 2.7L EcoBoost (238kW/324PS): Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install and lubricate new O-ring seals. Refer to the appropriate Specifications .

  3. Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to the appropriate Refrigerant Oil Adding procedure in General Procedures .
scientia non olet · About LEMON Manuals