Pinpoint Test H : One Or Both High Beams Are On Continuously - Led (Light Emitting Diode) Headlamps: Notes
WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Headlamps/Autolamps for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Exterior Lighting - Overview .
REFER to: Exterior Lighting - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B103C:01 | Left Headlamp Control: General Electrical Failure | A continuous memory and on-demand DTC that sets in the HCM if the adaptive front lighting module senses a component or wiring fault inside the headlamp assembly. |
| B103D:01 | Right Headlamp Control: General Electrical Failure | A continuous memory and on-demand DTC that sets in the HCM if the adaptive front lighting module senses a component or wiring fault inside the headlamp assembly. |
Possible Sources
- LH steering column multifunction switch
- SCCM
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the LH steering column multifunction switch for damage.