Pinpoint Test F : One Or Both Low Beams Are On Continuously - Led (Light Emitting Diode) Headlamps: Notes
WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Headlamps/Autolamps for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Exterior Lighting - Overview .
REFER to: Exterior Lighting - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B143B:11 | Autolamp On Input: Circuit Short to Ground | An on-demand DTC that sets when the BCM detects a short to ground on the autolamp on input circuit. |
| B143C:11 | Headlamp Off Input: Circuit Short to Ground | An on-demand DTC that sets when the BCM detects a short to ground on the headlamp off input circuit. |
| B143D:11 | Headlamp On Input: Circuit Short to Ground | An on-demand DTC that sets when the BCM detects a short to ground on the headlamp on input circuit. |
| B143E:11 | Headlamp Switch Input: Circuit Short to Ground | A continuous memory DTC that sets when the BCM detects a short to ground on the headlamp switch input circuits. |
| B1447:11 | Parklamp On Switch Input: Circuit Short to Ground | An on-demand DTC that sets when the BCM detects a short to ground on the parklamps on input circuit. |
| B103C:01 | Left Headlamp Control: General Electrical Failure | A continuous memory and on-demand DTC that sets in the HCM if the adaptive front lighting module senses a component or wiring fault inside the headlamp assembly. |
| B103D:01 | Right Headlamp Control: General Electrical Failure | A continuous memory and on-demand DTC that sets in the HCM if the adaptive front lighting module senses a component or wiring fault inside the headlamp assembly. |
| B1087:00 | LIN Bus "A": No Sub Type Information | A continuous memory and on-demand DTC that sets in the HCM if communication is lost with the adaptive front lighting module. |
| B1088:00 | LIN Bus "B": No Sub Type Information | A continuous memory and on-demand DTC that sets in the HCM if communication is lost with the adaptive front lighting module. |
Possible Sources
- Wiring, terminals or connectors
- Headlamp switch
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the headlamp switch for damage.