Symptom Chart: Information And Message Center - Warnings
Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Symptom Chart
| Condition | Possible Sources | Actions |
|---|---|---|
| A Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) fault message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test BF |
| A brake warning (brake fluid level low, parking brake applied or brake system malfunction) message is never displayed | Refer to the Pinpoint Test | GO to Pinpoint Test Q |
| A brake warning (brake fluid level low, parking brake applied or brake system malfunction) message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test R |
| The charging system warning message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test S |
| The check fuel fill inlet message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test BR |
| A door, liftgate or hood ajar warning message is never or always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test T |
| The electric park brake fault message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test U |
| The engine oil change message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test BS |
| The engine oil life message is never displayed | Refer to the Pinpoint Test | GO to Pinpoint Test BT |
| The engine on warning message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test BU |
| The engine over-temperature warning message is never or always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test V |
| The Electric Vehicle (EV) fuel message is never or always displayed (PHEV) | Refer to the Pinpoint Test | GO to Pinpoint Test BV |
| The low engine use mode message is never or always displayed (PHEV) | Refer to the Pinpoint Test | GO to Pinpoint Test BV |
| The lane keeping alert system warning message (keep hands on wheel) is never or always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test CK |
| A load shed warning message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test S |
| The low fuel warning message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test AF |
| The low engine oil pressure warning message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test AD |
| The low engine oil pressure warning message is always displayed (HEV) | Refer to the Pinpoint Test | GO to Pinpoint Test AE |
| A MyKey® menu is not available or incorrect | Refer to the Pinpoint Test | GO to Pinpoint Test BW |
| The ready to drive message is never or always displayed (HEV) | Refer to the Pinpoint Test | GO to Pinpoint Test AK |
| The rear seatbelt monitor warning message is never or always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test BN |
| Service AdvanceTrac® warning message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test AM |
| A TPMS malfunction message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test AO |
| The tire training complete message is never on | TPMS sensor training incomplete | GO to Pinpoint Test BX |
| A tire training message (train left front, right front, left rear or right rear tire) message is never on | TPMS warning indicator concern TPMS sensor training concern |
GO to Pinpoint Test BX |
| The tires not trained message is always on | TPMS sensor training concern | GO to Pinpoint Test BX |
| The transmission not in park (shift to park) message is always displayed | Refer to the Pinpoint Test | GO to Pinpoint Test AJ |