LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit Connect XL, Van Cargo >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System - 2.5L DURATEC (125KW/170PS) >> Diagnosis And Testing >> Starting System >> Pinpoint Test(s) >> Pinpoint Test B : Unusual Starter Noise >> Pinpoint Test B : Unusual Starter Noise

Pinpoint Test B : Unusual Starter Noise

  1. B1 CHECK THE STARTER MOUNTING

    • Inspect the starter mounting bolts for looseness.

    Is the starter motor mounted correctly? 

    Yes  GO to  B2
    No  INSTALL the starter motor correctly. REFER to: Starter Motor .

  2. B2 CHECK FOR STARTER NOISE

    • Ignition OFF.

    • Connect a remote starter switch between the starter solenoid C197A-1 ("B" terminal) and C197B-1 ("S" terminal).

    • Engage the starter and verify the noise is due to starter operation.

    Is the noise due to the starter engagement? 

    Yes  REFER to: Starter Motor Drive Gear and Flywheel Ring Gear Inspection .
    No  REFER to: Engine to continue diagnosis.
scientia non olet · About LEMON Manuals