Starter Motor Drive Gear and Flywheel Ring Gear Inspection

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Activation 

1. WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

   Refer to: Health and Safety Precautions .

2. Refer to: Starter Motor .
3. Check the wear patterns on the starter drive gear and the flywheel or flexplate ring gear. If the wear pattern is normal, install the starter motor. Refer to: Starter Motor .

   Courtesy of FORD MOTOR COMPANY

4. If the starter drive gear and the flywheel or flexplate ring gear are not fully meshing and the gears are scored or damaged, install a new starter motor. Refer to: Starter Motor .
5. If necessary, install a new flywheel or flexplate. Refer to: Flexplate .