Ignition Lock Cylinder: Installation
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
- Make sure the ignition lock cylinder is in the ACC position.
- Insert the ignition lock cylinder into the ignition lock cylinder access hole located on the steering column. Make sure to align the locking pin with the locking pin access hole.
- Install the PATS Transceiver. Refer to: Passive Anti-Theft System (PATS) Transceiver .
- Rotate the ignition key through all lock cylinder positions to check for correct operation