Hood Latch: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

If equipped. Disconnect the hood ajar switch electrical connector.

Courtesy of FORD MOTOR COMPANY
Remove the hood latch assembly.
1. Remove the bolts from the hood latch.
  Torque: 80 lb.in (9 Nm)
2. Release the retaining clips on the secondary hood latch release handle.
3. Disconnect the primary hood latch release cable from the mounting bracket.
4. Remove the primary hood latch release cable eyelet from the hood latch.

Courtesy of FORD MOTOR COMPANY