Passive Entry

The passive entry feature unlocks or locks the doors, fuel filler door (if equipped), and tailgate without having to use a mechanical key blade or the RKE transmitter feature.

With a programmed passive key within 1m (3.28ft) outside a door, touch the lock or unlock sensor on the exterior door handle. The doors lock or unlock depending upon which sensor was touched on the handle. The unlock sensor is located on the inside of the handle and the lock sensor is located on the outside top face of the handle.

With the 2-staged unlock feature enabled, the driver front door passive entry feature unlocks the driver door and fuel filler door (if equipped). With the 2-staged unlock feature disabled, the driver front door passive entry feature unlocks all doors, fuel filler door (if equipped), and tailgate. The passive entry feature always locks all doors, fuel filler door (if equipped), and tailgate when the lock sensor is touched for a half second. The passenger front door entry feature always locks or unlocks all doors, fuel filler door (if equipped), and tailgate.

When the BCM detects a lock or unlock sensor is touched on an exterior front door handle or the tailgate release button is pressed, it activates the corresponding low frequency antenna in the corresponding exterior front door handle and inside the cargo area. The low frequency antenna sends out a signal to the passive key. The low frequency signal activates the passive key and the passive key sends a high frequency signal back to the BCM. If requested action is performed if the BCM detects a programmed passive key.

With a programmed passive key within 1m (3.28ft) of the tailgate, press the release button to release the tailgate.