Main Control Cover: Installation
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the transmission main control cover seal for damage and install new if necessary.
-
NOTE: Install the stud bolts in the locations noted during disassembly.
Install the main control cover, the bolts and the stud bolts.
Torque : 106 lb.in (12 Nm)
- Connect the wiring harness retainer and the TSS sensor electrical connector.
- Connect the wiring harness retainers and the transmission electrical connector.
- If equipped, install the underbody shield and the bolts.
- Connect the wiring harness retainers.
- Install the fan motor and shroud. Refer to: Cooling Fan Motor and Shroud .
- Install the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe .
- Fill the transmission with transmission fluid. Refer to: Transmission Fluid Drain and Refill .