Pinpoint Test G : The Alarm System Does Not Arm Or No Turn Signal Flash Confirmation: Notes

Diagnostic Overview 

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods for information about these practices.

Refer to Remote Keyless Entry And Alarm , Remote Keyless Entry and Alarm for schematic and connector information.

Normal Operation and Fault Conditions 

Refer to System Operation, Perimeter Alarm in Anti-Theft -- With Intelligent Access (IA) .

Refer to System Operation, Arming the Perimeter Alarm in Anti-Theft -- With Intelligent Access (IA) .

Possible Sources 

• Door ajar input
• Hood ajar input
• Luggage compartment lid ajar input
• Turn signal output
• Keyless entry keypad concern
• RKE transmitter concern
• BCM

Visual Inspection and Diagnostic Pre-checks 

• Inspect the hood ajar switch for damage.