BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C113A:11 | Wakeup Control: Circuit Short To Ground | Sets when the BCM detects a short to ground from the wakeup control output circuit. |
| C113A:15 | Wakeup Control: Circuit Short To Battery or Open | Sets when the BCM detects an open or short to voltage from the wakeup control output circuit. |
Possible Sources:
- Wiring, terminals or connectors
- PATS transceiver
- BCM
- PCM
Visual Inspection and Diagnostic Pre-checks
- Verify the BCM fuse 18 (10A) is OK.