Anti-Theft - Passive Anti-Theft System (Pats), Without Intelligent Access (IA)

• Description And Operation
  • Anti-Theft
    • Overview
    • System Operation
      • System Diagram
      • Network Message Chart
        • PCM Network Input Messages
        • BCM Network Input Messages
        • Passive Anti-Theft System (PATS)
        • PATSPIDs
        • BCM Module PID Chart
        • Unlimited Key Mode
    • Component Description
      • Integrated Keyhead Transmitter (IKT)
      • Passive Anti-Theft System (PATS) Transceiver
• Diagnosis And Testing
  • Anti-Theft
    • DTC Charts
      • Notes
      • BCM DTC Chart
      • PCM DTC Chart
    • Symptom Chart
    • Pinpoint Tests
      • Notes
      • Pinpoint Test A : The Engine Does Not Start
      • Pinpoint Test B : B10D7:05
        • Notes
        • BCM DTC Fault Trigger Conditions
        • Pinpoint Test B : B10D7:05
      • Pinpoint Test C : B10D7:87 Or B10D7:8F
        • Notes
        • Pinpoint Test C : B10D7:87 Or B10D7:8F
      • Pinpoint Test D : B10D9:87
        • Notes
        • Pinpoint Test D : B10D9:87
      • Pinpoint Test E : C113A:11 Or C113A:15
        • Diagnostic Overview
        • Normal Operation and Fault Conditions
        • BCM DTC Fault Trigger Conditions
        • Pinpoint Test E : C113A:11 Or C113A:15
• General Procedures
  • Enable or Disable Spare Key Programming
  • Erase All Keys and Program Two Keys
  • Key Programming - Unlimited Key Mode
    • Enable
    • Disable
  • Key Programming Using Diagnostic Equipment
  • Key Programming Using Two Programmed Keys
  • Passive Anti-Theft System (PATS) Parameter Reset
• Removal And Installation
  • Passive Anti-Theft System (PATS) Transceiver
    • Notes
    • Removal And Installation