Pinpoint Test H : B1305:01: Notes
Diagnostic Overview
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods for information about these practices.
Refer to Remote Keyless Entry And Alarm , Remote Keyless Entry and Alarm for schematic and connector information.
Normal Operation and Fault Conditions
Refer to Component Description, Hood Ajar Switch in Anti-Theft -- With Intelligent Access (IA) .
Refer to System Operation, Perimeter Alarm in Anti-Theft -- With Intelligent Access (IA) .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1305:01 | Hood Switch: General Electrical Failure | Sets when the BCM detects an open from the hood ajar input circuit or when the hood is open during the BCM self-test. |
Possible Sources
- Wiring, terminals or connectors
- Hood ajar switch
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the hood ajar switch for damage.