Pinpoint Test BC : The Key-In-Ignition Warning Chime Is Inoperative: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Instrument Cluster for schematic and connector information.
Normal Operation and Fault Conditions
See Key-In-Ignition Warning Chime. REFER to: Warning Chimes - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10F1:14 | Key In Switch: Circuit Short To Ground or Open | A continuous and on-demand DTC that sets in the BCM if an open is detected on the key-in-ignition switch input with the ignition ON. |
Possible Sources
- Wiring, terminals or connectors
- Interior lighting concern
- Key-in-ignition switch (part of the ignition switch)
- BCM
- GWM concern
- IPC