LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Transfer Case - 2.0L ECOBOOST (184KW/250PS) - Mi4) >> Removal And Installation >> Transfer Case Input Shaft Seal LH >> Removal

Transfer Case Input Shaft Seal LH: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the PTU/transfer case. Refer to: Transfer Case .
  2. Remove and discard the PTU cover bolts and remove the PTU cover.
    GFD281805Courtesy of FORD MOTOR COMPANY
  3. Remove and discard the PTU cover O-ring seal.
    GFD281806Courtesy of FORD MOTOR COMPANY
  4. Remove the input shaft.
    GFD281811Courtesy of FORD MOTOR COMPANY
  5. Remove and discard the LH input shaft seal.
GFD281812Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals