Pinpoint Test V : A Door Passive Entry Feature Is Inoperative: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Remote Keyless Entry and Alarm for schematic and connector information.
Normal Operations and Fault Conditions
REFER to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B11C6:01 | Passenger Door External Antenna: General Electrical Failure | Sets when the BCM detects a fault from one of the circuits to the passenger side keyless entry antenna (internal to the front passenger exterior door handle). |
| B11CA:01 | Driver Door External Antenna: General Electrical Failure | Sets when the BCM detects a fault from one of the circuits to the driver side keyless entry antenna (internal to the front driver exterior door handle). |
| B1381:11 | Left Front Door Handle Proximity Sensor: Circuit Short To Ground | Sets when the BCM detects a fault from one of the circuits to the left front exterior door handle. |
| B1381:15 | Left Front Door Handle Proximity Sensor: Circuit Short To Battery or Open | Sets when the BCM detects a fault from one of the circuits to the left front exterior door handle. |
| B1381:29 | Left Front Door Handle Proximity Sensor: Signal Invalid | Set when the BCM detects an activated touch sensor for more than 5 minutes. |
| B1382:11 | Right Front Door Handle Proximity Sensor: Circuit Short To Ground | Sets when the BCM detects a fault from one of the circuits to the right front exterior door handle. |
| B1382:15 | Right Front Door Handle Proximity Sensor: Circuit Short To Battery or Open | Sets when the BCM detects a fault from one of the circuits to the right front exterior door handle. |
| B1382:29 | Right Front Door Handle Proximity Sensor: Signal Invalid | Set when the BCM detects an activated touch sensor for more than 5 minutes. |
| B1383:11 | Left Rear Door Handle Proximity Sensor: Circuit Short To Ground | Sets when the BCM detects a fault from one of the circuits to the left rear exterior door handle. |
| B1382:15 | Left Rear Door Handle Proximity Sensor: Circuit Short To Battery or Open | Sets when the BCM detects a fault from one of the circuits to the left rear exterior door handle. |
| B1382:29 | Left Rear Door Handle Proximity Sensor: Signal Invalid | Set when the BCM detects an activated touch sensor for more than 5 minutes. |
| B1384:11 | Right Rear Door Handle Proximity Sensor: Circuit Short To Ground | Sets when the BCM detects a fault from one of the circuits to the right rear exterior door handle. |
| B1384:15 | Right Rear Door Handle Proximity Sensor: Circuit Short To Battery or Open | Sets when the BCM detects a fault from one of the circuits to the right rear exterior door handle. |
| B1384:29 | Right Rear Door Handle Proximity Sensor: Signal Invalid | Set when the BCM detects an activated touch sensor for more than 5 minutes. |
Possible Causes
- Wiring, terminals or connectors
- Door lock system concern
- RKE system concern
- Exterior door handle
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the exterior door handles for damage.