Pinpoint Test C : B1305:01: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Remote Keyless Entry and Alarm for schematic and connector information.
Normal Operations and Fault Conditions
REFER to: Perimeter Anti-Theft Alarm - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1305:01 | Hood Switch: General Electrical Failure | Sets when the BCM detects an open from the hood ajar switch input during a self-test. |
Possible Causes
- Wiring, terminals or connectors
- Hood latch
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the hood latch for damage