Halfshaft Seal LH - 2.3L EcoBoost (257kW/350PS) - MI4: Installation
WARNING: This page is about a different variant/trim than selected.
- Install the halfshaft seal. Use Special Service Tool: 205-115 Installer, Drive Pinion Seal.
- Install the LH halfshaft. Refer to: Front Halfshaft LH - 2.3L EcoBoost (257kW/350PS) - MI4 .
- Check the transmission fluid level. Refer to: Transmission Fluid Level Check - 2.3L EcoBoost (257kW/350PS) - MI4 .
- Install the underbody shield.
- Lower the Vehicle.