Pinpoint Test L : The 360 Degree View Camera System Does Not Respond When The Camera Selection Switch Is Pressed: Notes
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
IPMB DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B14A5:11 | Multi-Camera View Switch: Circuit Short To Ground | A continuous and on-demand DTC that sets in the IPMB when the camera selection switch is stuck closed or the circuit is shorted to ground. |
Possible Causes
- Wiring, terminals or connectors concern
- Camera selection switch concern
- IPMB concern
Visual Inspection and Diagnostic Pre-Checks
- Inspect the camera selection switch to verify that the switch is not damaged or stuck in the pressed position.