Symptom Chart: Warning Chimes
| Condition | Possible Sources | Actions |
|---|---|---|
| All the chimes are inoperative | IPC | VERIFY the IPC gauges and indicators are functioning correctly. If the IPC gauges and indicators are not functioning correctly, GO to Pinpoint Test A If the IPC gauges and indicators are functioning correctly, Refer to IPC HARDWARE TESTING . |
| The active park assist chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AR |
| The adaptive cruise control warning chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AS |
| The Belt-Minder® chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test BF |
| The Belt-Minder® cannot be deactivated | Refer to the Pinpoint Test | GO to Pinpoint Test BF |
| The Blind Spot Information System (BLIS)/Cross Traffic Alert (CTA) warning chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AT |
| The chime always sounds | Refer to the Pinpoint Test | GO to Pinpoint Test AU |
| The chimes only sounds from the IPC | Refer to the Pinpoint Test | GO to Pinpoint Test AV |
| The door ajar warning chime is inoperative or always sounds | Door ajar indication concern BCM IPC |
VERIFY the safety belt warning chime operates for 6 seconds following ignition ON. If the safety belt warning chime sounds, diagnose the door ajar message center warning. GO to Pinpoint Test AL If the safety belt warning chime does not sound, Refer to IPC HARDWARE TESTING . |
| The forward collision warning chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AW |
| The headlamps on warning chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AX |
| The hill start assist chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AY |
| The key-in-ignition warning chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AZ |
| The key left in vehicle chime is inoperative (push button start only) | Refer to the Pinpoint Test | GO to Pinpoint Test BA |
| The lane keeping alert warning chime is inoperative | Refer to the Pinpoint Test |
NOTE:
The lane keeping aid warning chime only sounds to alert the driver that the driver's hands are no longer on the steering wheel. Normal alerting is done through steering wheel vibrations, which cannot be felt when the driver's hands are not on the steering wheel. GO to Pinpoint Test BB |
| The low fuel warning chime is inoperative or always sounds | Refer to the Pinpoint Test | GO to Pinpoint Test BC |
| The parking brake warning chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test BD |
| The perimeter alarm chime is inoperative | Refer to the Pinpoint Test | VERIFY the perimeter alarm functions correctly and the headlamps on warning chime operates with the headlamps on, ignition OFF and the driver door open. If the perimeter alarm functions correctly and the headlamps on warning chime sounds, diagnose the perimeter alarm. Refer to: Perimeter Anti-Theft Alarm . If the perimeter alarm functions correctly and the headlamps on warning chime does not sound, Refer to IPC HARDWARE TESTING . If the perimeter alarm does not operate correctly, Refer to: Perimeter Anti-Theft Alarm . |
| The remote key programming chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test BE |
| The safety belt warning chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test BF |
| The turn signal/hazard on warning chime is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test BG |