P2008 - Intake Manifold Runner Control Circuit/Open (Bank 1)
P2008 - INTAKE MANIFOLD RUNNER CONTROL CIRCUIT/OPEN (BANK 1)
| Description: | This DTC sets when an open circuit is detected in the IMRC1A circuit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IMRC1 and IMRC2 sensor values should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HU . | ||