Pinpoint Test C : The Visual Park Aid Alert Is Inoperative: Notes

Refer to Parking Aid for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Parking Aid - System Operation and Component Description .

Possible Causes 

• The feature is disabled
• Rear parking aid camera configuration
• Audible parking aid system concern
• APIM concern
• BCM concern

Visual Inspection and Diagnostic Pre-Checks 

• If the rear parking aid camera is not configured after replacement, some video functions will be inoperative. Verify the rear parking aid camera configuration using the diagnostic scan tool.
• Verify that the visual parking aid alert is enabled in the using the FDIM settings menu.