Roof Opening Panel Weatherstrip: Installation

1. 1.
   
   Place a new weatherstrip into position on the glass assembly, with the splice (seam) on the passenger side.

Courtesy of FORD MOTOR COMPANY

1. 2.
   
   Starting with the corners, push the weatherstrip into position. Continue pushing the weatherstrip into position around the glass assembly until complete. Use a plastic or rubber hammer if necessary.

1. 3.
   
   Install the roof opening panel. For additional information, refer to Roof Opening Panel Glass .

1. 4.
   
   Align the roof panel. For additional information, refer to Roof Opening Panel Alignment .

1. 5.
   
   Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization .