Pinpoint Tests: B129E:73
Refer to Wiring Diagrams Cell 131 for schematic and connector information.
Normal Operation and Fault Conditions
When pressed, the active park assist switch provides a ground to the Parking Aid Module (PAM).
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129E:73 | Enable/Disable Switch - Semi-Automatic Advanced Parallel Park: Actuator Stuck Closed | A continuous and on-demand DTC that sets when the active park assist switch signal circuit is shorted to ground, the normally open switch is stuck closed or the switch is pressed and held for more than 10 seconds. |
Possible Sources
- Wiring, terminals or connectors
- Parking Aid Module (PAM)
- Active park assist switch