Pinpoint Test X : U3006:16: Notes
Refer to Wiring Diagrams Cell 131 for schematic and connector information.
Normal Operation and Fault Conditions
The Image Processing Module - B (IPM-B) receives voltage from the RJB fuse 29 (5A).
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | Set in continuous memory and on-demand by the Image Processing Module - B (IPM-B) when the supply voltage falls below 8 volts for 20 ms or longer. |
Possible Sources
- Wiring, terminals or connectors
- Battery
- Charging system
- Image Processing Module - B (IPM-B)