Pinpoint Test J : The Parking Aid Disable Switch Led (Light Emitting Diode) Is Inoperative Or Always On: Notes

Refer to Parking Aid for schematic and connector information.

Normal Operation and Fault Conditions

The PAM supplies voltage to the parking aid disable switch LED when the parking aid system has been disabled using the switch.

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Conditions
B1B54:11	Function LED - Park Aid: Circuit Short To Ground	A continuous and on-demand DTC that sets when the parking aid disable status LED circuit is shorted to ground.
B1B54:12	Function LED - Park Aid: Circuit Short To Battery	A continuous and on-demand DTC that sets when the parking aid disable status LED circuit is shorted battery voltage.

Possible Sources