Consumption Gauge (PHEV)
WARNING: This page is about a different car, the 2017 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The consumption gauge is a virtual gauge, displayed only in EV Now mode, and provides information to the driver indicating short term vehicle consumption, consumption needed to make it to a target destination and average vehicle consumption between charges. The IPC receives the consumption data from the GWM over the HS-CAN3. The GWM receives the consumption data from the SOBDMC over the HS-CAN1.
The consumption gauge is displayed with 3 basic components.
- Consumption required to reach a programmed target destination. It is shown as the u-shaped outline (blue) on the sides and bottom of the gauge. The top of the cup indicates the required consumption.
- The second is short term consumption. It is shown as a horizontal bar (white) that represents the current battery fill level. The input is also used for the instantaneous portion of the debt-surplus gauges.
- Average consumption between charges. It is shown as a triangle pointer along the side of the gauge. The input is also used for the average portion of the debt-surplus gauges.