LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Energi Titanium >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - 2.0L DURATEC - Hybrid (96KW/130PS) (Hybrid/ENERGI) >> Removal And Installation >> Thermostat Housing >> Removal

Thermostat Housing: Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Engine Cooling System Health and Safety Precautions .

  1. 2.

    Refer to: Cooling System Draining, Filling and Bleeding .

  1. 3.

    NOTE: Be prepared to capture escaping fluid.

    Use the General Equipment: Hose Clamp Remover/Installer

GFD71100Courtesy of FORD MOTOR COMPANY

  1. 4.

    Use the General Equipment: Hose Clamp Remover/Installer

    Torque: 89 lb.in (10 Nm)

GFD71101Courtesy of FORD MOTOR COMPANY