Engine Cooling System - 2.0L DURATEC - Hybrid (96KW/130PS) (Hybrid/ENERGI)

• Specifications
  • Specifications
• Description And Operation
  • Engine Cooling - Component Location
  • Engine Cooling - System Operation and Component Description
    • System Operation
      • Fail Safe Cooling
• Diagnosis And Testing
  • Engine Cooling
    • Notes
    • PCM DTC Chart
    • Inspection and Verification
    • Symptom Chart
    • Pinpoint Tests
      • Pinpoint Test A : Loss Of Coolant
        • Notes
        • Pinpoint Test A : Loss Of Coolant
      • Pinpoint Test B : The Engine Overheats
        • Notes
        • Pinpoint Test B : The Engine Overheats
      • Pinpoint Test C : The Engine Does Not Reach Normal Operating Temperature
        • Notes
        • Pinpoint Test C : The Engine Does Not Reach Normal Operating Temperature
      • Pinpoint Test D : The Electric Coolant Pump Is Inoperative Or Does Not Operate Correctly
        • Notes
        • Pinpoint Test D : The Electric Coolant Pump Is Inoperative Or Does Not Operate Correctly
    • Component Tests
      • Cooling System Pressure Test
      • Thermostat
      • Radiator Leak Test, Removed From Vehicle
• General Procedures
  • Cooling System Draining, Filling and Bleeding
• Removal And Installation
  • Block Heater
    • Notes
    • Removal
    • Installation
  • Coolant Pump
    • Notes
    • Removal
    • Installation
  • Cooling Fan Motor and Shroud
    • Notes
    • Removal
    • Installation
  • Radiator
    • Notes
    • Removal
    • Installation
  • Thermostat
    • Notes
    • Removal
    • Installation
  • Thermostat Housing
    • Notes
    • Removal
    • Installation
  • Degas Bottle
    • Notes
    • Removal
    • Installation
  • Heater Hoses
    • Notes
    • Removal
    • Installation