Pinpoint Test D : The Active Park Assist System Does Not Activate When The Active Park Assist Switch Is Pressed: Notes
Refer to AUDIO SYSTEM/NAVIGATION - WITH TOUCHSCREEN/WITHOUT SONY for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129E:11 | Enable/Disable Switch - Semi-automatic Advanced Parallel Park: Circuit Short To Ground | A continuous and on-demand DTC that sets in the PAM when the PAM detects a short to ground on the active park assist switch input circuit. |
Possible Causes
- Wiring, terminals or connectors
- Communication network concern
- Active park assist switch (also known as instrument panel console switch assembly)
- PAM (integral to the BCM) concern