LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Fusion Titanium, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel & Steering Column Electrical Components -- (Except Hybrid) >> Diagnosis And Testing >> Steering Wheel and Column Electrical Components >> Symptom Charts >> Symptom Chart: Steering Column Switches

Symptom Chart: Steering Column Switches

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: DIAGNOSTIC METHODS .

SYMPTOM CHART

Condition Possible Causes Actions
No power in all ignition switch positions - conventional ignition switch
  • Refer to PINPOINT TEST
No power in ACC - conventional ignition switch
  • Refer to PINPOINT TEST
No power in RUN - conventional ignition switch
  • Refer to PINPOINT TEST
No power in START - conventional ignition switch
  • Refer to PINPOINT TEST
  • DIAGNOSE the no-start condition. Refer to the appropriate article for the procedure.
No power in ON - push button ignition switch
  • Refer to PINPOINT TEST
Key not detected displays in the message center
  • Refer to PINPOINT TEST
The ignition mode indicator is inoperative
  • Refer to PINPOINT TEST
The ignition mode indicator is always on
  • Refer to PINPOINT TEST
The ignition key cannot be returned to the OFF position
  • Refer to PINPOINT TEST
The ignition key can be turned to the OFF position when the selector lever is not in PARK
  • Refer to PINPOINT TEST
The ignition key is hard to turn
  • Refer to PINPOINT TEST