Pinpoint Test AY: The Compass Display Is Inaccurate

• Position the vehicle and observe the compass display:

  Direction	Compass Display
  North	N
  Northeast	NE
  East	E
  Southeast	SE
  South	S
  Southwest	SW
  West	W
  Northwest	NW

Does the compass display as indicated? 

1. Yes  : The compass is operating correctly at this time. The concern could have been caused by external magnetic interference. INFORM the customer of the compass operation.

   REFER to: MESSAGE CENTER - SYSTEM OPERATION AND COMPONENT DESCRIPTION .

2. No  : GO to AY2 

• Verify whether the compass display changes direction with the vehicle.

Does the compass display change direction? 

1. Yes  : GO to PINPOINT TEST AX 
2. No  : GO to AY3 

• Calibrate the compass and set the zone. Refer to the Owner's Literature.

Does the compass calibrate correctly? 

1. Yes  : The compass is OK. The concern may have been cause by an incorrect zone setting or calibration concern.
2. No  : INSTALL a new compass module.

   REFER to: COMPASS MODULE .

   SET the zone and CALIBRATE the compass. REFER to the Owner's Literature.