Removal And Installation: Thermostat: Removal
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- 1.WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in GENERAL INFORMATION . Failure to follow this instruction may result in serious personal injury.
Refer to: Engine Cooling System Health and Safety Precautions .
- 2.
Drain the cooling system. REFER to: Cooling System Draining, Vacuum Filling and Bleeding .
- 3.NOTE: Be prepared to capture escaping fluid.
Release the clamps and disconnect the coolant hoses from the thermostat housing.
Use the General Equipment: Hose Clamp Remover/Installer