Body Panel System - Body Closures
- Specifications
- Description And Operation
- Body Closures
- Component Location
- Overview
- System Operation
- Component Description
- Front Power Liftgate Switch
- Rear Power Liftgate Switch
- Liftgate Release Switch
- Without IA
- With IA
- Pinch Strip Switch
- Power Liftgate Chime
- Power Liftgate Latch
- Unlatch/Cinching Motor
- Power Liftgate Detent Switch and Forkbolt Primary and Secondary Switches
- Latch Switch States
- Sector Gear Switches
- Sector Gear Switch States
- Power Liftgate Motor
- Position Sensor
- Liftgate/Trunk Module (LTM)
- Body Closures
- Diagnosis And Testing
- Power Liftgate
- Notes
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: The Power Liftgate is Inoperative
- Pinpoint Test B: The Power Liftgate Is Inoperative From Any Power Liftgate Control Switch
- Pinpoint Test C: The Power Liftgate Stops In The Secondary Latch Position
- Pinpoint Test D: The Power Liftgate Reverses During The Power Close Operation
- Pinpoint Test E: The Power Liftgate Pinch Strip Does Not Stop Or Reverse The Liftgate
- Pinpoint Test F: The Power Liftgate Does Not Power Close (Power Open OK)
- Pinpoint Test G: The Power Liftgate Does Not Power Open (Power Close OK)
- Pinpoint Test H: The Power Liftgate Closes (With A Continuous Chime) Immediately After A Power Open
- Pinpoint Test I: The Power Liftgate Chime Is Inoperative
- Pinpoint Test J: DTC B117C
- Pinpoint Test K: DTC B2418, B2419 Or B2420
- Pinpoint Test L: DTC B2908
- Pinpoint Test M: DTC B2935
- Pinpoint Test N: DTC B1317
- Pinpoint Test O: DTC B1318
- Pinpoint Test P: DTC U0140
- Pinpoint Test Q: DTC U0155
- Power Liftgate
- General Procedures
- Removal And Installation