LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes (Except Hybrid) >> Description and Operation >> Instrument Panel Cluster (IPC) - System Operation and Component Description >> System Operation >> Network Message Chart - Gauges

Network Message Chart - Gauges

MODULE NETWORK INPUT MESSAGES - IPC

Broadcast Message Originating Module Message Purpose
AWD  data PCM  Input used for the virtual AWD  gauge display.
Engine coolant temperature data PCM  Input used for the temperature gauge indication.
Engine overheat indication request PCM  Input used to send the temperature gauge to full hot.
Engine rpm data PCM  Input used for tachometer indication.
Ignition status BCM  Ignition RUN, START and accessory states required for the IPC  operating modes and fault reporting.
Vehicle speed PCM  Vehicle speed data used for the virtual AWD  gauge display and speedometer indication.
scientia non olet · About LEMON Manuals