Brake Warning Indicator

The brake warning indicator informs the driver the brake fluid level is low, there is a failure in the base brake system or the electric park brake is applied. The IPC  uses 3 messaged inputs to control the brake warning indicator.

The IPC  receives the brake (red) warning indicator request, the brake warning indicator request and the red brake warning indicator request from the GWM  over the High Speed Controller Area Network 3 (HS3-CAN).

The GWM  receives the brake (red) warning indicator request and the brake warning indicator request from the ABS  module over the High Speed Controller Area Network 2 (HS2-CAN).

The GWM  receives the red brake warning indicator request from the BCM  over the High Speed Controller Area Network 2 (HS2-CAN).

Refer to ABS/Brake/STABILITY-TRACTION CONTROL SYSTEM INDICATION  description for information on the conditions when the brake warning indicator is turned on.