ABS Warning Indicator

The IPC  receives the ABS  warning indicator request message from the GWM  over the High Speed Controller Area Network 3 (HS3-CAN). The GWM  receives the ABS  warning indicator request message from the ABS  module over the High Speed Controller Area Network 2 (HS2-CAN). If a fault condition exists in the ABS, the ABS  module sends the ABS  warning indicator request message to either flash or illuminate the ABS  warning indicator.

Refer to ABS/Brake/STABILITY-TRACTION CONTROL SYSTEM INDICATION  description for information on the conditions when the ABS  warning indicator is turned on