Rear Lower Arm: Installation

NOTE: Align the mark on the rearward lower control arm adjustment cam to the mark on the crossmember.

NOTE: Do not fully tighten the rearward lower control arm adjustment cam nut at this time.

Fig 1: Locating Lower Control Arm Adjustment Cam Nut

Courtesy of FORD MOTOR CO.

Finger tight at this stage.
Refer to: Spring .
General Equipment : Vehicle/Axle Stands

Fig 2: Supporting Rear Suspension Using Vehicle/Axle Stands
Courtesy of FORD MOTOR CO.

NOTE: Tighten the suspension bushing fasteners with the suspension loaded or with the weight of the vehicle resting on the wheels and tires, otherwise incorrect clamp load and bushing damage may occur.

Fig 3: Locating Lower Control Arm Adjustment Cam Nut

Courtesy of FORD MOTOR CO.

Torque : 90 Nm
Refer to: Rear Toe Adjustment ( REAR TOE ADJUSTMENT ).