Roof Opening Panel Frame: Installation

WARNING: This page is about a different car, the 2016 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

1.

To install, reverse the removal procedure.

2.

NOTE: Note the position of the motors when transferring the motors to the new frame. Make sure the motors are installed to the new frame in the same position as removed from the old frame.

NOTE: The cable mechanisms for the movable glass on the new frame will be in the glass closed position.

NOTE: Install the fixed glass to the frame before installing the new frame.

Transfer parts as necessary.

3.

Once all components are installed, initialize the roof opening panel. Refer to: Power Roof Opening Panel Initialization .