LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 662 (Information Center Instrumentation, Message Center And Warning Chimes) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AP : The Engine Hours And Engine Idle Hours Display Is Inoperative >> Notes

Pinpoint Test AP : The Engine Hours And Engine Idle Hours Display Is Inoperative: Notes

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Normal Operation and Fault Conditions 

See Engine Hours Display and Engine Idle Hours Display. REFER to: Message Center - System Operation and Component Description .

If the engine RPM data message is missing or invalid for less than 5 seconds, the IPC defaults engine hours and engine idle hours displays to the last display based on the last message received.

If the vehicle speed message is missing or invalid for 5 seconds or longer, the IPC sets DTC U0100:00 and defaults the engine hours and engine idle hours to the last displayed value with no additional accumulation.

Possible Sources