P0096 - Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1) - DTC Chart
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 Lincoln Navigator, 2015 Lincoln MKZ, 2015 Lincoln MKX, 2015 Lincoln MKT, and 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
P0096 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT RANGE/PERFORMANCE (BANK 1) - DTC CHART
| Description: This DTC sets when the intake air temperature 2 (IAT2) sensor PID does not correlate with the charge air cooler temperature (CACT) sensor or the intake air temperature (IAT) sensor PIDs at ignition ON. It also sets if the IAT2 sensor PID exceeds the maximum calibrated temperature threshold while driving. | |||
Possible Causes:
|
|||
| Diagnostic Aids:
The IAT2 sensor is located on top of the intake manifold. Aftermarket heaters that are attached to the engine, transmission or battery may cause DTC P0096 to set in cold weather climates after a 6 hour soak period. This DTC may be accompanied by other DTCs. Check for other DTCs and diagnose those first. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DN . | ||