LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Automatic Transmission External Controls) >> Diagnosis And Testing >> External Controls - Floor Shift >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the transmission external control.
  2. Visually inspect for obvious signs of mechanical and electrical damage; refer to the following chart:
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Damaged Brake Shift Interlock Actuator (BSIA)
    • Damaged Tow/Haul switch
    • Damaged Select Shift™ switch
    • Failed fuse(s):
      • Body Control Module (BCM) 18 (10A)
      • BCM  42 (5A)
    • PCM
    • Loose or damaged connections
    • Damaged wiring harness
    • Corroded or damaged terminals
  3. If the fault is not visually evident, determine the symptom. GO to SYMPTOM CHART - EXTERNAL CONTROLS, FLOOR SHIFT  or GO to SYMPTOM CHART - NVH FLOOR SHIFT .