Inspection and Verification
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the entire mirror assembly and glass to assist in verification of the customer concern and/or impact damage.NOTE: Do not clean the mirror glass with an ice scraper, razor blade, abrasive pad or harsh chemicals, as these may damage the glass and/or housing.
- Visually inspect for obvious signs of mechanical or electrical damage.VISUAL INSPECTION CHART
Mechanical Electrical - Exterior mirror
- Exterior mirror cover
- BJB fuse 39 (10A)
- Smart Junction Box (SJB) fuse 12 (7.5A)
- SJB
- Exterior mirror control switch
- Exterior mirror motor
- Exterior mirror
- Loose or corroded connections
- Wiring harness
- If the concern is not visually evident, verify the symptom and GO to Symptom Chart - Rear View Mirrors or GO to Symptom Chart - NVH .