Application Chart (J)
WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the overdrive One-Way Clutch (OWC). The torque converter may engage in PARK and NEUTRAL with PTO engaged.
CLUTCH, SOLENOID, APPLICATION CHART (J)
| Selector Lever Position | Gear | TCC Torque Converter (D) | O/D OWC | L/R OWC | ||
|---|---|---|---|---|---|---|
| Manual 3rd | 3 | (1) | X | O/R | ||
| Manual 2nd | 2 | (1) | O/R | X | ||
| Manual 1st | 1 | (1) | X | X | ||
O/R = Overrunning X = Holding (D) = Directly Proportional |
||||||