Application Chart (D)
WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the overdrive One-Way Clutch (OWC). The torque converter may engage in PARK and NEUTRAL with PTO engaged.
CLUTCH, SOLENOID, APPLICATION CHART (D)
| Selector Lever Position | Gear | TCC Torque Converter (D) | O/D OWC | L/R OWC | ||||
|---|---|---|---|---|---|---|---|---|
| P | P | LP/LA | X | X | ||||
| N | N | LP/LA | X | X | ||||
| R | R | LP/LA | X | - | ||||
| (D) | 1 | (1) | X | X | ||||
| (D) | 2 | (1) | O/R | X | ||||
| (D) | 3 | (1) | X | O/R | ||||
| (D) | 4 (2) | (1) | O/R | O/R | ||||
| (D) | 5 | (1) | X | O/R | ||||
| (D) | 6 | (1) | O/R | O/R | ||||
O/R = Overrunning LP = Low Pressure LA = Low Current X = Holding (D) = Directly Proportional |
||||||||