LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Automatic Transmission - 5R110W (TORQSHIFT(R)) -- F450 & F550 Super Duty) >> In-Vehicle Repair >> Transmission Filler Tube >> Removal

Transmission Filler Tube: Removal

WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid level indicator.
    Fig 1: Locating Transmission Fluid Level Indicator
    G06140622Courtesy of FORD MOTOR CO.
  2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  3. Remove the bolt and the transmission fluid level indicator tube.
    Fig 2: Locating Transmission Fluid Level Indicator Tube Bolt
    G06773623Courtesy of FORD MOTOR CO.
  4. Remove and discard the transmission fluid filler tube O-ring.
    Fig 3: Locating Transmission Filler Tube O-Ring
    G06140618Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals